Error correction mode (ecm), R"... - u – Panasonic Panafax UF-750 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Error Correction Mode (ECM)
ECM mode provides error free copy when your fax machine is connected with a
receiving fax machine which has ECM mode capability and your ECM mode is set
to ON. The transmission time required in the ECM mode is the same as the normal
G3 mode in most cases.
Your machine is preset to ECM = ON. If the telephone line is poor, then the
transmission will take longer because the machine will have to retransmit the lines
that have errors. In the case where the transmission time is more important than the
quality of the received copy, you may set your fax machine to ECM = OFF. This
will inhibit the ECM mode for the transmission regardless of the capability of the
receiving machine. To set ECM = OFF,
1
— MODE -f-
r"... - u------
DOCUMENT SET
ECM«ON
repeatedly.
SELECT
DOCUMENT SET
ECM.OFF
To return to ECM = ON, press SELECT
again.
You can now dial by pressing TEL/DIAL
and a full number, a One-Touch key,
ABBR and two digits, or REDIAL
NOTE
1. After changing the ECM setting, you can
a) return to standby with STOP .
b) start a different series of settings by pressing RESOLUTION . ORIGINAL
I STAMP I, HALF TONE |, MODE I - 11 + I, or FUNCTION .
2. To change the preset ECM position, see page 30.
44