English, Power source, Radio – Panasonic RQ-V153 User Manual

Page 2: Auto reverse, Fast forward and rewind, Maintenance h), Bass/treble controls, Xbs level control, Notes, Antennas

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ENGLISH

POWER SOURCE

•Insert two UM-3 (Panasonic R6/LR6 or equivalent,

not included) batteries into the Battery Compart­

ment, making sure of proper polarities.

•When the batteries are weak, the tape sound will

become distorted, and the volume will decrease.

•For AC power operation, use only Panasonic AC

adaptor (optional).

RADIO

1. Connect the included stereo earphones to the

0

Jack,

2. Set the SELECTOR Switch to “RADIO”.
3. Set the BAND Selector to the desired radio band.

•To receive FM stereo broadcast, set the BAND

Selector to “FM ST”.

4. Tune in your favorite station using the TUNING

Control.

The FM ST Indicator will light during FM stereo

broadcast.

5. Adjust the volume using the VOLUME Control.

6. The radio can be turned off by setting the

SELECTOR Switch to “TAPE jog”.

■ Auto Reverse

During playback when the tape comes to the end of

its travel, the tape direction changes automatically to

start playing the opposite side of the tape.

•Tape direction can be reversed manually during

playback by the DIR Selector.

■ Fast Forward and Rewind

The tape will rapidly advance in the forward or

reverse direction when one of the FAST Buttons is

pressed.

•When the tape reaches the end by pressing one of

the FAST Buttons, the tape movement stops, but

the unit is not turned off. Do not leave the set in this

condition. Be sure to press the STOP Button.

•Do not press the PLAY Button during fast forward or

rewind, as this may jam the tape. Always press the

STOP Button first, between functions.

MAINTENANCE H)

Get into habit of cleaning the head assembly (after

every 10 hours or so) with a cotton swab dampened

with a little alcohol.

Note;

•If FM stereo reception is poor (excessive noise. FM

ST Indicator flickers), set the BAND Selector to

“FM”. This will reduce the noise and provide more

clear reception; however, the broadcast will not be
heard in stereo,

■ BASS/TREBLE Controls

BASS: the dynamic low frequency range.

TREBLE: the dynamic high frequency range.

Positioning the control to the side of the detent

will amplify the corresponding controls; the side

will attenuate it.

■ XBS LEVEL Control

XBS boosts the low frequency range.

You can enjoy the dynamic low sound.

NOTES

•Batteries installed with incorrect polarities may leak

and damage this unit.

•Do not mix batteries (old and new) or types (carbon

and alkaline).

•If the set is not used for a long period of time, or is

used only from an AC power source, remove all the

batteries to prevent potential damage due to possi­

ble battery leakage.

•Avoid using or placing this unit near sources of

heat. Do not leave it in an automobile exposed to

direct sunlight for a long period of time with the

doors and windows closed, as this may deform the
cabinet.

•Avoid

spray-type

insecticides.

Some

insecticides

contain chemicals that could cause cabinet de­

formation.

■ Antennas
FM

The

stereo

earphones

cord

serves

as

the

FM

antenna, hence be sure to use it extended, not

coiled.

Advertising