Panasonic EY6812 - Manual (Page 8)

© Auxiliary handle
Place the auxiliary handle at your
favorite position and tighten the han­
dle securely.
© Depth gauge
Loosen the bolt and adjust the depth
gauge at your favorite depth.
After adjusting, tighten the bolt
securely.
Battery Pack
For Appropriate use of NMMH
Battery Pack EY9210
• Charge the Ni-MH battery fully
before storage In order to ensure a
longer service iife.
• The ambient temperature range is
between OX and 40X.
If the battery pack is used when
the battery temperature is below
OX, the tool may fail to function
property. In that case, charge the
battery until charging te corri^ed
for appropriate functioning of the
battery.
Battery Pack Life
The rechargeable batteries have a
limited life. If operation time becomes
extremely
short after recharging,
replace the battery pack with a new
one.
Note: * Use under extremely hot or
cold conditions will reduce
operating capacity per
charge.
0 Release lever
• Battery pack Installation and
Removiu
-For removal-
Pull the release lever to free the bat­
tery holder.
<S> Battery holder
(D Release
lever
-For Installation-
Fit the battery holder unit it clicks In
position.
0 Battery charger
Note: Charge a new battery pack, or
a battery pack that has not
been used for a prolonged time,
for about 24 hours to bring the
battery up to full charge.
- 8 -