Panasonic RQV162 - Manual (Page 8)

POWER SOURCE {^[ d |) RADIO
•Battery removal
Press battery “2" toward the © battery terminal and
remove it.
•Battery life
When the batteries are weak, the tape speed wilt slow
down, the sound will become distorted, and the volume
will decrease. Replace them with new ones as soon as
possible.
To Prevent Possible Damage to this Unit
•Load new battery with their polarities (© and 0)
aligned correctly.
•Do not apply heal to batteries, or internal shortcir-
cuit may occur.
•If this unit is not to be used for a long period of time,
or used on AC power source, remove the batteries
and store them in a cool and dry place.
•Remove spent batteries immediately.
•Do not use old and new batteries together. Also
never use an alkaline battery with a manganese
battery.
1. Connect the included stereo earphones to the Head­
phones Jack.
2. Set the Function Selector to "FM" or “AM”.
3. Tune in your favorite station using the Tuning Control.
•When you listen to a FM broadcast, set the FM
Mode Selector to the proper position (Refer below).
4. Adjust the Volume Control, Graphic Equalizer Con­
trols and XBS Level Control to the desired setting.
•To turn off the radio, set the Function Selector to
“TAPE
Notes:
•To receive FM stereo broadcasts, set the FM/Mode
Selector to “STEREO".
•If FM stereo reception is poor (excessive noise), set
the FM Mode Selector to "MONO”. This will reduce
the noise and provide more clear reception; howev­
er, the broadcast will not be heard in stereo.
- 8 -