Read – Panasonic KX-E2500 User Manual
Page 209
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Read
The Read operation enables you to copy one or multiple texts
(Maximum of 8) from the disk to the internal memory. Only a
copy is read into memory, the original text remains on disk.
The prompt “MEMORY FULL!” will be displayed when the
entire capacity of the internal memory has been used. Therefore,
check the memory available (CODE+O) before reading into the
internal memory. If necessary, delete unwanted texts, or write
them to disk and clear from the internal memory before reading
new texts in.
If no disk is in the drive when you try to read, the screen will
prompt:
NO DISK!
If you try to read a disk which does not have a format that the
KX-E2500 can read, the screen will prompt;
ILLEGAL DISK FORMAT!
199