Specifications – Cub Cadet S6031 User Manual
Page 44
Specifications
11
44
NOTE: Specifications subject to change without notice.
* As rated by engine manufacturer
Engine:
31HP Kawasaki
Type:
Vertical air cooled V-Twin
Air Cleaner:
Dual Paper element with rain cap
Lube System:
Pressurized with oil filter
Hydraulic System:
In tank filter, 6 quart capacity, aluminum oil cooler with 12VDC fan
Starter:
12-volt electric
Traction Drive:
Engine to two variable-output hydraulic pumps each connected to individual wheel motors
Cutter Deck Drive:
60” belt driven with reconfigurable features
Clutch:
Electric
Deck Lift:
Hydraulic with pin lock for height adjustment at 1⁄4” increments
Cutting Height:
1” to 5”
no. of Blades:
3, belt-driven, power take-off from engine
Controls:
Engine ignition and start switch; throttle; speed control pedals; electric blade clutch switch; parking brake;
mower deck lift
Steering:
14” diameter steering wheel coupled to hydraulic steering valve and cylinder
Parking Brake:
Mechanical linkage brake to internal drum brakes
Front Wheels:
16 x 6.50 - 8
Tire Pressure:
10-12 psi rear, 20-25 psi front caster
Drive Wheels:
24 x 12.00-12
Frame:
2” Steel structural tube and plate, all welded construction
Seat:
Adjustable seat. 7” Adjustment, with arm rests
Fuel Tank:
Two 33 lb Liquid Propane Fuel Tanks
Ground Speed:
0-10+ MPH forward & 0-5 MPH reverse
Instrumentation:
Hour meter, Tachometer, Maintenance-Minder
Net Weight:
1625 lbs