Special functions, Pip (picture in picture) button, Swap button – Panasonic CT-27SF34 User Manual
Page 19: Size button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Special Functions
(cont.)
PIP (Picture in Picture) Button
This feature allows the viewer to monitor one channel
program while watching another. The monitored source
(PIP) can be a different channel or a different video
source (such as a VCR) when connected to the input
jacks.
• When the Main Picture is in Video mode with no
signal, the PIP will not operate properly.
Swap Button
Press the SWAP button (when the PIP frame is dis
played) to interchange what is being viewed on the Main
Picture with that of the PIP frame.
VIDEO 1
PIPCH2
PIP Operation
1. Turn VCR ON and select a desired channel.
2. Press the TV Mode Selection button to operate TV
Remote functions, if necessary.
Note; Audio will be that of Main Picture.
3.
Press the PIP button (set must be ON). The PIP
frame will appear at the position it was* last
displayed. The Main Picture Video Source and PIP
Video Source will display on screen momentarily.
Audio will be that of Main Picture.
PIP
Size Button
Press the SIZE button (when the PIP frame is displayed)
to choose either the large or small PIP frame.
4. Press the PIP button again to cancel PICTURE IN
PICTURE feature (if desired).
ptp
- 1 9 -