Panasonic WV-CP160 - Manual (Page 13)

2-1. ALC Mode with SUPER-D2 ON
Super Dynamic 2 Function (SUPER-D2)
The important object in a scene is usually placed in the center of the monitor's screen. In
SUPER-D2 mode, the dynamic range is 64 times greater than a conventional camera. This
allows you to see all the details on the monitor, even under difficult lighting condition. You
can use the SUPER-D2 function if you select ALC.
1. After selecting ALC, press El to open
the ALC CONT menu.
2. Move the cursor to the SUPER-D2
parameter and select ON
If you want to adjust the video output
level, move the cursor to the T posi­
tion. Adjust to the desired level by
pressing d or ,
«* AliC COMT •*
BACK LIGHT COMP
SnPKR-D2 'OETj
MASK SET 1
LEVEL , . , I. .
RET EKD
___
J
** ALC CONT **
SACK LIGHT COMP
SUPER-D2 iOMl
LEVEL . . . I. .
+
RET END
___ ^
2-2. ALC Mode with SUPER-D2 OFF and ELC Mode
Note: If ELC is selected, set MASK SET according to this procedure.
1. Move the cursor to the SUPER-D2
parameter and select OFF, (When you
select ELC, SUPER-D2 is not avail­
able.) The item MASK SET appears on
the menu.
2. Move the cursor to MASK SET and
press El ■ 48 mask areas appear on
the monitor screen. The cursor is blink­
ing in the upper left corner of the
screen.
r
** ALC CONT **
BACK LIGHT COMP
SUPER-D2 prrj
MASK SET ~l
LEVEL
+
RET END
.. ^