Caution on installation, Camera setup menu, Opening the setup menu – Panasonic WV-CP160 User Manual
Page 9: Dimensions of mounting bracket, Setup
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DIMENSIONS OF MOUNTING BRACKET
Caution on installation
Use wood screws with the cam
era mounting bracket that are
suitable for installation into a
wood
base
of
appropriate
dimensions and strength. For
installation in a material other
than wood, refer servicing to
qualified service personnel.
83.5(3-5/16)
SETUP
1. CAMERA SETUP MENU
This camera utilizes a user setup menu that is displayed on-screen.
• Opening the Setup Menu
Press and hold down o for 2 seconds or
more.
The CAM SET UP menu appears on the
monitor as shown at right.
Check the current settings on the menu.
*• CAM SET UP **
CAMERA ID
OPP-
ALC/ELC
ALC
"t
SHUTTER
OPP
AGC
ON
SENS OP
OPP
WHITE BAL
ATW
SET UP DISABLE
Highlighted
Refer to the sections below for a detailed description of menu items. If you decide not to
make any changes after checking the current settings, move the cursor to END at the start
of the bottom line, and press (E3 to close the CAM SET UP menu and return to normal cam
era picture mode.
Note:
If no button is pressed for 5 minutes while the CAM SET UP menu or any other menu
is opened, the menu is automatically closed and the mode returns to the normal cam
era picture.