Canon IMAGEFORMULA DR-2020U - Manual (Page 26)

26
Scanning with CaptureOnTouch
This section describes the DR-2020U’s scanning application,
CaptureOnTouch.
CaptureOnTouch Features
Using CaptureOnTouch allows you to scan using easy-to-follow on-
screen instructions. In addition, by assigning scan functions to the
buttons on the DR-2020U scanner’s operation panel, you can perform
scanning procedures without your computer.
The following describes the output procedures for the two screens
found in CaptureOnTouch.
Scan First
Select an output method after a document is scanned, and then
configure the necessary settings.
To use the Scan First default settings, press the START button when
“Scan First” appears on the display panel.
If you press the START button while a job appears on the display
panel, scanning for that job will begin.
Scan document
▼
Select output method
▼
Configure output settings
▼
Output scanned images
START Button