Canon IMAGEFORMULA DR-2020U User Manual
Page 38
38
4
Configure the settings for the mail server.
• Enter the mail server address in [Mail Server].
• If necessary, enter the port number to use for sending mail in
[Port number].
• Specify the authentication method for the mail server in the
[Authentication method] list box. If necessary, click [Access
setting] to specify a user name and password for authentication.
5
Click [OK] to close the [Environmental settings] dialog
box.
Job Settings
If you selected [Send by E-mail] for the output method in the [Register
new job] dialog box
, the [Compose e-mail] tab appears as
follows.
Configure the following settings regarding the destination of the e-mail
message:
• Enter the recipient address in [Mail address]. Click [History] to select
an address from a history of previous recipients.
• Enter the return address in [Reply-to address].
• Enter the subject for the e-mail message and a message under
[Subject] and [Text], respectively.