Canon 220 HS - Manual (Page 112)

112
You can choose among 4 different image quality settings.
Choose the image quality setting.
z After pressing the m button, press the
op buttons to choose , then press the
m button again.
Choose an option.
z Press the op buttons to choose an
option, then press the m button.
X The option you set will appear on the
screen.
Image Quality and Shooting Time per Memory Card
• Based on Canon’s testing standards.
• Recording will automatically stop when the clip file size reaches 4 GB, or when the
recording time reaches approximately 10 minutes when shooting in
or , and
approximately 1 hour when shooting in or .
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 6 or higher memory cards are recommended.
Changing the Image Quality
Image
Quality
Recording Pixels,
Frame Rate
Content
Memory Card Capacity
4 GB 16 GB
1920 x 1080 pixels,
24 frames/sec. For shooting full
high-definition movies. Approx.
14 min. 34 sec.
Approx.
59 min. 40 sec.
1280 x 720 pixels,
30 frames/sec. For shooting
high-definition movies. Approx.
20 min. 43 sec.
Approx.
1 hr. 24 min.
54 sec.
640 x 480 pixels,
30 frames/sec.
The image quality will be
higher when compared
with
, but the recording
time will be shorter.
Approx.
43 min. 43 sec.
Approx.
2 hr. 59 min.
3 sec.
320 x 240 pixels,
30 frames/sec.
Since the file size is small,
shooting time will
increase, but the image
quality will decrease.
Approx.
1 hr. 58 min.
19 sec.
Approx.
8 hr. 4 min.
30 sec.
Black bars will appear on the top and bottom of the screen in or .
These areas will not be recorded when shooting.