Yamaha DTR2 - Manual (Page 27)

To skip undesirable sections using the skip ID
When the unit encounters a skip iD signai, the tape fast-
forwards to the beginning of the next tune.
To write the skip iD signai
During piayback, press the SKiP iD WRiTE button at the
beginning of the section to be skipped.
The button lights. Piayback stops temporarily and the skip
iD signai is written. (Whiie writing, the SKiP-iD indicator
flashes.)
SKIP PLAY
OFF^ ^ON
7T
Fast-forward
Play back Playback ^
I
1st tune I 2nd tune
Subcode 1 Subcode 2
Skip ID signal
Skip piayback
Set the SKiP PLAY button to the ON position.
When a skip iD signal is detected during playback, the tape
fast-forwards to the beginning of the next tune and
piayback resumes.
• When you want to piay a tape containing a skip iD
signai without the skip piay function, set the SKiP PLAY
button to the OFF position. The tape wiii be played
normally, but the skip ID signal is not erased.
To erase the skip iD signai
1 Set the SKiP PLAY button to the OFF position.
2 Piay the tune which contains the skip iD to be
erased, and press the SKiP iD ERASE button when
the SKiP iD indicator iights.
The tape is rewound to the position where the skip ID
was written. The SKiP iD indicator fiashes and the skip
iD is erased. Piayback resumes after the skip iD is
erased.
27