Switching to radio mode, Selecting the freouencv band / memory bank, Selecting the am waveband – Yamaha San Diego CD32 User Manual

Page 10: Tuninq into a station, Setting the sensitivity of station seek tuning, Tuning into stations manually, Tuning into a station, Radio mode

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

RADIO MODE

Radio mode

Switching to radio mode

If you are in CD or CD changer mode
(CD changer only with the Las Vegas

CD32),

o keep pressing the SOURCE ®

button until the radio mode
appears in the display together with

the memory bank and frequency.

Selecting the freouencv band /

memory bank

This unit can receive programs broad­

cast over the FM and AM frequency
band. There are three preset memory
bank for the FM range and one for the
AM range. Six stations can be stored
on each memory bank.

Selecting the FM memory bank

To switch between the FM memory bank

FM1, FM2 and FMT,

O press the BAN DATS button @.

Selecting the AM waveband

To select the AM waveband,

O keep pressing the BAND/TS button

until AM appears in the display.

Tuninq into a station

There are various ways of tuning to a
station.

Automatic seek tuning

o Press the Y or A button ®.

The unit tunes to the next receivable

station.

Setting the sensitivity of station

seek tuning

You can choose whether to tune only
to strong reception stations or to also
tune to those with a weak reception.

o Press the MENU button ®.

o Keep pressing the Y or A button

® until “SENS HI” or “SENS LO”

appears in the display

“SENS HI” means that the tuner is set

high to sensitivity. “SENS LO” means it

is set to the low sensitivity setting. If

“SENS LO” is selected, “LOC” lights up

in the display.

o Set the required sensitivity using

the < and > buttons ®.

When you have finished making your

changes,
O press the MENU button ®.

Tuning into stations manually

You can also tune into stations manu­
ally.

O

Press the < or > button ®.

Storing station presets

Storing stations manuaily

o Select the required memory bank

(FM1, FM2 or FMT) or the AM

waveband.

o Tune into the station.

o Press one of the station buttons

1-6 ® for longer than one second

to store the station in that preset

memory.

10

mBLAUPUNKT

Advertising
This manual is related to the following products: