Yamaha FX900 - Manual (Page 2)

Congratulations!
You are the proud owner of a Yamaha FX900 SIMUL-EFFECT PROCESSOR. The FX900
takes advantage of unmatched Yamaha digital signal processing technology to provide a fully
configurable system of up to seven simultaneous effects with extensive programming capability.
A unique system of "algorithms" makes it possible to connect effects in series, in parallel, and in
any desired order, while a full complement of parameters is available for fine-tuning each effect.
With a wide range of programmable effects including compressor, distortion, equalizer,
enhancer, wah, pitch change, reverb, early reflection, delay, echo, and modulation, the FX900
gives you a complete state-of-the-art signal-processing system in one compact package. There
are 100 superlative preset effect programs that you can simply select and use right away, and 100
RAM memory locations which can be used to store original signal-processing sounds that you
create using the FX900’s broad-ranging programming features. The FX900 can also function in
a l-in/2-out or 2-in!2-out configuration to fit any system. For further versatility and smooth
integration with MIDI-based music systems, the FX900 offers broad external control
capabilities. Any of its 100 memory locations may be directly selected from a remote MIDI device
such as a keyboard or MIDI foot controller. It is also possible to directly control effect
parameters in real time. An optional FC900 remote control unit is available for comprehensive
foot control of many important FX900functions.
No other multi-effect device offers this type of versatility, and the sound is nothing less than
superb.
Please read through this operation manual thoroughly while learning to use your FX900, in
order to take full advantage of all the sophisticated capabilities it provides
—
and keep the
manual in a safe place for later reference!
INPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
WARNING : THIS APPARATUS MUST BE EARTHED
IMPORTANT. The wires in this mains lead are coloured in accordance with the following code:
GREEN-AND-YELLOW
BLUE
BROWN
EARTH
NEUTRAL
LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the
terminals in your plug proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
CANADA
THIS APPARATUS COMPLIES WITH THE "CLASS B"
LIMITS FOR RADIO NOISE EMISSIONS SET OUT IN
RADIO INTERFERENCE REGULATIONS.
CET APPAREIL EST CONFORME AUX NORMES
"CLASSE B", POUR BRUITS RADIOELECTRIQUES.
TEL QUE SPECIFIER DANS LE REGLEMENT SUR LE
BROUILLAGE RADIOELECTRIQUE.
Ш