Vac gauge – Panasonic QUICKDRAW MC-V7377 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The electronic dirt sensor is a feature which
will
detect particles as they pass through the
vacuum cleaner.
A red light indicates dirt is being picked up
by the cleaner. A green light indicates most
of the dirt has been picked up by the clean
er.
The dirt sensor indicators and sensor
sensitivity switch are located on the
front of the switch cover. See DIRT
SENSOR under TO OPERATE
CLEANER section for operation.
Sensor
\ r SensItMty
I—f Switch
VAC GAUGE
The vac gauge located on Uie front of your vacuum clean
er dust cover, indicates when the dust bag should be
changed. Change the dust bag when FULL is indi
cated in order to maintain the best cleaning efficien
cy.
NOTE:
If tile vac gauge indicates FULL while the
dust bag is still empty, check to see if there are any
clogs as explained in the REMOVING CLOGS sec
tion. The vac gauge indicator may not move as
expected when loose, fluffy dust is vacuumed.
- 1 0 -