Panasonic QUICKDRAW MC-V7377 - Manual (Page 15)

Always operate the vacuum with a genuine Panasonic Type U3 Standard, or U6
Electrostatic dust bag installed. Panasonic dust bags may be ordered through any
authorized Panasonic dealer.
1. Pull outward on the
dust cover grip, located
on the top of the dust
cover and remove the
cover.
3. Spread out the end
of the new dust bag.
NOTE: Pull carefully so
as not to tear the bag at
the folds.
CD
□ o
2. To remove the dust
bag, grasp the cardboard
portion of the dust bag
and pull it out.
4. Fold the new dust bag to
clear the slots as shown in
illustration. Failure to do
so will prevent the dust
cover from closing
properly. Attach the
new dust bag onto
the bag holder by
holding the card­
board portion and
pushing back as
illustrated.
5. Reinsert the tab pro­
vided on №e end of the
dust cover into the
grooves on the dust com
partment to allow the
cover to rotate closed.
NOTE: The dust
cover must be com­
pletely and cor­
rectly installed for
proper opera­
tion.
6. Rotate the dust cover up
into the closed position and
press into place.
NOTE: The dust bag
should not be caught
between the
lower edge of
the dust cover
and the gasket
as indicated by the
arrow in the illustra­
tion.
-
15
-