Panasonic PT-51G40 - Manual (Page 29)

NOTE When the CH LOCK MODE is selected, perform
procedure Steps A through D
Step A
When CH
IS selected press the CH DOWN button to
highlight “LOCK THESE CHANNELS"
Step B
Then use the Remote Control Keyboard to select a
channel you desire to lockout
Step C
Press the CH DOWN button to select next Channel
position
Step D
Then repeat Step B
fit
C until desired Channels are
locked out (up to 4 Channels)
5 Press the CH DOWN button to highlight “HOW
MANY HOURS"
6 Press the VOL LEFT or RIGHT button to select 12,
24 or 4B (hours lockout time)
7 Press the CH DOWN button to highlight “ENTER
CODE" then enter a 3 digit code by using the
Remote Control Keyboard IMPORTANT NOTE
Use a code you can easily remember
B Press the VOL RIGHT button to select “YES" for
Lock feature to be activated “CHANNELS LOCKED"
will display On Screen
To Unlock the Lockout feature- follow Steps 1 through
3 and enter same 3 digit code as in Step 7 Channel
Unlocked display will appear
ENTER SAME 3 DIGIT CODE
IF 3 DIGIT CODE IS THE SAME
Lock Feature Activated
INCORRECT UNLOCK
CODE ENTERED
IF 3 DIGIT CODE IS NOT THE SAME
- 2 9 -