Before use, Parts identification, Charging – Panasonic ES8080 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Before use

This Wet/Dry shaver can be used for

wet shaving with shaving lather or for
dry shaving. You can use this water­
tight shaver in the shower and dean
it in water. Treat yourself to wet lather
shaves for at least three weeks and
notice the difference. Your Panasonic
Wet/Dry shaver requires a little time
to get used to because your skin and
beard need about a month to adjust
to any new shaving method.
Charge the shaver for at least 8 hours

before using it for the first time or

when it has not been in use for more
than six months.

Parts identification

(see fig. 1)

® Protective cap

(g)

System outer foil

© System outer foil release but­

tons

© Inner blades

© Shaving mode selector

© Mode indicator

© Battery capacity monitor/

Charge status lamp

@ Switch button

® Trimmer

® Trimmer switch

® Charging adaptor with auto­

matic voltage adjustment

© Charging adaptor holder

Rotatable stand

(N) Soft case

Charging

(see fig. 1, 2)
Lift up the charging adapter holder

when charging the shaver. (See fig.

1(A))

(Restore the charging adaptor holder
when carrying the unit.) (See fig.

1(B))

When using the charging adaptor,

rotate the stand at the base of the

charging adaptor to ensure that it is
stable. (See fig. 1(C))

Place the charging adaptor upright

on a flat surface. Plug the adaptor
into an AC outlet.

It will adjust automatically to voltages

between 100-120 and 220-240V AC.

In some areas, a special plug adap­

tor may be required.
Switch the shaver off and place it up­

right into the charging adaptor with

the switch facing toward the front.
The charge status lamp will glow
when the shaver is placed on the
correct position. It will flash when the
charging is completed.
At the same time, the battery capac­

ity monitor will display the fully

charged condition (see fig. 2 (A)). The
system will turn off in about 10 min­

utes after the charging has' been

completed (see fig. 2 (B)).

You can fully charge the shaver in 1
hour if the battery capacity monitor

flashes down to the 20% level.

A full charge will supply enough
power tor about 14 shaves (three

minutes per shave for a normal
beard).

You can always store your shaver in
the charging adaptor to maintain full

Advertising