Panasonic ES8080 - Manual (Page 9)

off. Remove the system outer foil and
clean it with running water.-Wipe off
any moisture from the shaver with a
dry cloth and remove the protective
cap to allow the system outer foil to
dry completely, (see fig. 7)
Replacing shaving head
components
It is recommended that you replace
the outer foil at least every year and
the inner blade at least every two
years to maintain your shaver’s cut­
ting performance.
Replacing the system outer
foil
(see fig. 8)
Squeeze the system outer foil re­
lease buttons and lift the system
outer foil upward to remove it. To in­
sert the new system outer foil, press
down until it snaps into place.
Replacing the inner blades
(see fig. 9)
Squeeze the system outer foil re­
lease buttons and lift the system
outer foil upward to remove it. Re­
move the inner blade one at a time
by grasping it firmly at both ends and
pulling straight away from the shaver.
To insert the new inner blade, hold
the blade one at a time at both ends
and press downward until it snaps
into the shaver.
For environmental protec­
tion and recycling of
materiais
This shaver contains Nickel-Hydride
batteries.
Please make sure that the batteries
are disposed of at an officially as­
signed location, if there is one in your
country.
ATTENTION:
A nickel metal hydride battery that
is recyclable powers the product
you have purchased. Please call
1-800-8-BATTERY for information
on how to recycle this battery.
How to remove the built-in
rechargeable battery before
disposal of the shaver
(see fig. 10)
The procedure described below is
intended only for removal of the re­
chargeable battery for the purpose
of proper disposal.
1. Remove the two screws (a) and
the bottom cover (b).
2. Remove the upper cover (c).
3. Push the chassis (d) out of the
housing.
4. Turn the chassis over and remove
the batteries (e).
WARNING:
Do not attempt to replace the bat­
teries for the purpose of reusing
the shaver. This could result in the
risk of fire or electric shock.