Warning, Leak check warning, Caution – Coleman 5441 Series User Manual

Page 5: English-4, Match lighting, Instastart™ electronic ignition stoves

Advertising
background image

English-4

Fig. 12

■ Propane cylinder correctly installed. (Fig. 11)

■ Never operate stove with propane cylinder in an

inverted position. (Fig. 12)

Fig. 10

Fig. 9

■ Screw regulator into stove hand tight. (Fig. 9)

■ Remove plastic cap from top of propane bottle and

screw propane bottle into regulator hand tight. (Fig. 10)

Fig. 11

WARNING

• Perform leak test outdoors.
• Extinguish all open flames.
• NEVER leak test when smoking.
• Do not use the outdoor stove until connection

has been leak tested and does not leak.

Leak Check

WARNING

• BURN HAZARD

• Never leave stove unattended when hot

or in use.

• Keep out of reach of children.

To Light

DANGER

• EXPLOSION - FIRE HAZARD

• Propane is heavier than air and can accumu-

late in low places. If you smell gas, leave the
area immediately.

• Always attach or detach propane source out-

doors; never while stove is lighted, near flame,
pilot lights, other ignition sources or while
stove is hot to touch.

• This stove is very hot during use and can

ignite flammables too close to the burners.
Keep flammables at least 12 inches from the
sides and 48 inches from the top of the stove.
Keep gasoline and other flammable liquids
and vapors well away from stove.

• The stove must not be exposed to flammable

vapors or liquids during lighting.

Match Lighting

■ Set on sturdy, flat surface. For outdoor use only.

■ Hold lighted match near burner and open

burner valve. (Fig. 14)

■ Repeat for both burners.

Fig. 14

INSTASTART™
Electronic Ignition Stoves

■ Set on sturdy, flat surface. For outdoor use only.

■ Open burner valve and push igniter button

repeatedly until burner lights. (Fig. 13)

■ Repeat for both burners.
Note: If igniter fails to light stove, use match to light

burner. If the stove is wet the igniter may not spark.

Fig. 13

CAUTION

• SERVICE SAFETY

• Keep all connections and fittings clean.

Inspect propane cylinder and stove propane
connections for damage before attaching.

• During set up, check all connections and

fittings for leaks using soapy water. Bubbles
indicate a leak. Never use a flame.

■ Close both burner valves firmly. (Fig. 8)

Fig. 8

Advertising