Installation of camera – Panasonic WV-BP310 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTALLATION OF CAMERA
Mounting from the bottom
This camera is designed to be mounted from the
bottom, as shown below. The mounting hole is a
standard photographic pan-head screw size (1/4"
-
20
).
Mounting from the top
Remove the mount adaptor from the bottom of the
camera by removing the two fixing screws. Attach
the mount adaptor to the top as shown in the dia
gram, then mount the camera on the mounting
bracket.
Make sure that the two original fixing screws are
used when mounting the mount adaptor as longer
length screws may damage inner components.
Note: When installing the camera, use such a
camera mounting bracket as to support the
load of four times of the total weight.
<Mounting from top>
-18-