Follow steps 1-5, To pause play, Skipforwafd/ backward (ekfp function) – Panasonic SL-SX340 User Manual

Page 3: Backward (search function), Resume function notes, For your reference, I/pfri” indication, Removing discs, Auto-off function, Note on cd-r and cd-rw

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Sequential Play

[Basic Play

Follow steps 1-5.

In step 2: Connect the stereo earphones and wired remote control {SL-SX390) to the headphone jack (Qj.

(Plug in firmly.)

In step 5: The volume range is 0-25. Press and hold to change the volume successively. The volume changes when

pressed while the level is displayed, if any other display is shown, it changes to show the current level. (The
volume returns to 10 when you disconnect the power source.)

•Play stops automatically when all the tracks have been played.
• If the unit has been connected to the car audio system, set this unit’s volume to 10, then adjust the volume level on

the system.

Operation

------- ------ —

r.

----------7—

To pause play

■ ■

——

Skipforwafd/

backward

(ekfp function)

backward

(search function)

, 1

Button

Press during play.

Press again to restart play.

Press during play.

Resume function

Play starts from the beginning of
the current track the next time you
press [^/11] (main unit) or [H/^]
(remote control, SL-SX390 only).

Total number of tracks

Press during stop mode

No indicator is shown.

Press during play.
(Press [!◄◄ ] twice to skip to the
beginning of the previous tracks.)

Backward

Forward

Press and hold during play.

• During program play (page 4), these buttons are

used to skip forward or backward through the
programmed sequence of tracks.

•You cannot skip to tracks that have been played

in random or random repeat play (page 4).

• During program play, 1-track repeat play, random

play and random repeat play (page 4), search op­
eration is limited to the current track only.

Resume function notes

•Opening the lid while in the stop mode or replacing the disc while in the off mode cancels the function. (It may re­

main active if you replace a disc in the off mode.)

• Play may resume from the beginning of the next track if you stopped play near the end of a track.
•The resume function works automatically and cannot be turned off.

For your reference:
“ло

d /S

l

” indication

This indication appears for about 30 seconds if [►/II]
is pressed when no disc is loaded in the unit or if the
disc is not properly secured.

“i/Pfri” indication

This indication appears for about 10 minutes when the
cover is opened. (However, the indication does not ap­
pear when the unit is turned off.)

Removing discs
1

Press [■] to stop play and disc rotation.

2

Slide [OPEN ►] to open the lid.

3

Press [PUSH] to release the disc.

Do not stop the disc by hand or try to remove it before
it stops rotating. This can damage CDs.

Never insert foreign objects into the unit.

Auto-off function

if you leave the unit in stop mode for about 10 minutes
(30 seconds if disc is not loaded), it turns off to save

the batteries.

Note on CD-R and CD-RW

This unit can play CD-DA format audio CD-R and
CD-RW that have been finalized* upon completion
of recording. It may not be able to play some CD-R
or CD-RW due to the condition of the recording,
^Finalizing is a process that enables CD-R/CD-RW

players to play audio CD-R and CD-RW,

Advertising
This manual is related to the following products: