Panasonic KX-FP105 - Manual (Page 32)

One-Touch Dial
Storing names and telephone numbers in the One-Touch Dial ^
The unit’s memory allows you to use the One-Touch Dial for rapid access to your most frequently dialed
numbers. 6 stations are available.
• One-Touch Dial keys 1, 2 or 3 can be used as One-Touch Dial keys (DIAL MODE) or as broadcast keys
(BROADCAST). These functions cannot be used at the same time. For the broadcast function, see pages 56 to 58.
1
4
5
Press (DIRECTORY PROGRAM].
Display:
(HYPHEN) (SECRET]
PRESS STATION
OR USE JOG-DIAL
For stations 1-3
Press one of the One-Touch Dial keys.
DIAL MODE ▼ A
Press (START/SET/COPY) to go to the next prompt.
For stations 4-6
Press (LOWER), then press one of the One-Touch
Dial keys.
Enter the station name, up to 10 characters, by
following the instructions on page 25.
Example: NAME=john
Press (START/SET/COPY].
Example; < S 0 2 > =
Enter the telephone number up to 30 digits.
• To enter a hyphen in a telephone number, press
(HYPHEN) (One-Touch Dial key 1).
Example: < S 0 2 > = l l l - 4 4 9 7
Press (START/SET/COPY].
REGISTERED
To program other stations, repeat steps 2 to 6.
Press ( directory PROGRAM] to exit the program.
Note:
• If “DIAL MODE” is not displayed when you select
stations 1, 2 or 3 in step 2, the broadcast function has
been set. To use the station as a One-Touch Dial key,
press (S to select “DIAL MODE”. The broadcast
function will be canceled.
• A hyphen entered in a telephone number is counted as
two digits.
(START/SET/COPY)
(DIRECTORY PROGRAM)
Helpful hint:
• You can confirm the stored items on the
display (p. 36) or on the telephone number list
(p. 95).
To keep the telephone number
secret
Press ( secret ) (One-Touch Dial key 3) after
entering the telephone number in step 5.
• A secret number can not be viewed after this
is set.
• The telephone number will not appear on the
telephone number list.
• Pressing (SECRET) does not count as a
digit.
To edit a stored station name
and number
Enter the desired name in step 3.
Enter the desired number in step 5.
To erase a stored station name and number,
see page 35.
32