Panasonic KX-FP105 - Manual (Page 50)

Sending Faxes
Sending a fax using the Internet
1
2
4
5
Open the document feeder tray.
Adjust the width of the document guides to the size
of the document.
Insert the document (up to 15 pages) FACE DOWN
until a single beep is heard and the unit grabs the
document.
Display: STANDARD
If necessary, press (RESOLUTION) repeatedly to
select the desired setting (p. 45).
Press [iQ-FAXl.
IQFAX TO WHERE?
Enter the fax number using the dial keypad,
One-Touch Dial, [JOG^Ll or [BROADCA^]
key.
• When using the [JOG DIAL), press
fSTART/SET/COPY] after displaying the desired
item.
Example: FAX=<Adam>
Press fSTART/SET/COPY).
TRYING IQ-FAX
CONNECTING
I
SENDING P 1
SENT TO SERVER
• if the number you dialed is out of the FaxSav
network service area, the unit will show the
following messages and send the fax directly
over the telephone line.
OUT OF NETWORK
I
SENDING NORMAL
• If “OUT OF NETWORK” is displayed when
sending a fax long-distance or internationally
using IQ-FAX, then contact FaxSav at
1-888-332-9728.
Document guides
Document
feeder tray
(IQ-FAX
(START/SET/COPY)
[RESOLUTION
One-Touch
Dial keys/
[BROADCAST)
[JOG DIAL]
If you cannot send a fax
Contact FaxSav at 1 -888-332-9728.
The FaxSav customer service center may send
you a program update. While receiving this
update, you will not be able to operate the unit
and the following message will be displayed for
about 3 minutes.
Display; LOADING IQ-DATA
During this time, you will not be able to operate
extension telephones, if they are connected.
If a loading error occurs, the unit will display
the following message.
LOADING ERROR
In this case, contact FaxSav at 1-888-332-9728.
50