Panasonic KX-F1110NZ - Manual (Page 49)

Transferring incoming caii messages
This feature allows your unit to call a designated telephone or pager number each time an incoming voice
message is recorded.
You can choose Message transfer or Pager call.
Message transfer; Program the transfer telephone number first. When an incoming message is recorded in
your unit, the message will be transferred. You can retrieve the message during the same call by the remote
operation.
Pager call: Program the pager number first. When an incoming call is recorded, your pager will be called.
Call your unit and retrieve the message by the remote operation.
—This feature operates in the ANS/FAX mode.
—For details on the remote operation, see page 51.
—Use a touch tone telephone to access your unit.
An incoming voice message is recorded in memory. I
\
Your unit dials the transfer telephone number or pager number. |
^ Message transfer ^ Pager call
The transferred telephone rings, then
answers the call.
Your pager beeps.
\ \
Your unit will play the message
transfer greeting. ^ Call your unit to retrieve the message
by the remote operation.
^ within 60 seconds
Enter the remote operation ID {see
page 52).
\
SK The unit has a pre-recorded message
transfer greeting.
Retrieve the message by the remote
operation.
a —“This is a teiephone answering system.
1 Piease enter your remote ID for remote
I operation.”
49