Panasonic KV-SS010 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Installing the Imprinter Unit
2
Open the post-imprinter door of
the scanner.
3
Secure the clamp around the
cables as shown in the diagram
to the right.
4
Match and insert the scanner
pins
with
the
imprinter
unit
grooves.
• Be sure to completely insert the
scanner pins in the imprinter unit
grooves as shown in the diagram to
the right.
If it is not, printing can not be done
correctly.
• When installing the imprinter unit,
hold it as shown below.
Advertising