Panasonic KV-SS010 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installing the Imprinter Unit
3
Insert
the
connector
of
the
imprinter unit into the scanner
connector.
• Be sure to completely insert the
connector.
• Rotate the clamp in the direction of
arrow so that the clamp does not
push the imprinter door.
• When attaching the connector, hold
the imprinter unit as shown below.
4
insert
the
scanner
the imprinter unit
Match and
pins with
grooves.
• Be sure to completely insert the
scanner pins in the imprinter unit
grooves as shown in the diagram to
the right.
If it is not, printing can not be done
correctly.
• When installing the imprinter unit,
hold it as shown below.
5
Close the imprinter door.