Installation, Receiver location, Optional external equipment connections – Panasonic CT-13R17 User Manual

Page 5: Ac power supply cord, Remote control battery installation, Precaution on battery use, Instaiiation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installation

Receiver Location

This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options.

Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the
screen.

Use of some types of fluorescent lighting may reduce remote control transmitter range.

Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or

moisture.

To insure optimum color purity do not position magnetic equipment (motors, fans, other speakers, etc.) nearby.

Optional External Equipment Connections

The Video/Audio connections between components can be made with shielded video and audio cables. For best perfor­

mance, video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic

supply house.

Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you’ll need.

AC Power Supply Cord

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE

SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE THIS (POLARIZED) PLUG
WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY

INSERTED TO PREVENT BLADE EXPOSURE.

Remote Control Battery Installation

Batteries: Use two “AA” batteries.

1. Remove the battery compartment cover on back of

the remote.

Install the batteries in the battery compartment.
(Polarity (+) or (-) must be correct.)
Reattach the battery cover.

To Remove Cover Push in And Up

On Catch With A Narrow Object

2

.

3.

Helpful Hints:

For frequent Remote Control users, replace old

batteries with Alkaline batteries for longer life.

Precaution on Battery Use

Incorrect installation can cause battery leakage and corrosion that will

damage the Remote Control Transmitter.

Observe the Following Precautions:

1. Batteries must be replaced as a pair.

2. Do not combine a used battery with a new one.

3. Do not mix battery types (Example: “Zinc Carbon” with “Alkaline”).

4. Do not attempt to charge, short-circuit, disassemble, heat or burn used

batteries.

5. Battery replacement is necessary when Remote Control reacts

sporadically or stops operating the TV.

or

EUR501372

(WHITE)

- 5 -

Advertising
This manual is related to the following products: