Option setting – Panasonic G-CODE NV-FJ620 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Option Setting
1 Press the MENU button © to
display the Main menu on the TV
screen.
2 Press the Cursor buttons (A ▼)
to select [OPTION] then press the
OK button
Press the Cursor buttons (A T) 0
to select the desired field.
On Screen Display
TAPE SELECT:
To select the corresponding
video cassette tape length to
display the approximaste
remaining tape time,
- Press the Cursor buttons (◄►■) 0 to select the
corresponding video cassette tape length.
AUTO: The VCR automatically distinguishes E30, -60,
-90, -120, -180 and -240 tapes.
El 95:
For El 95 tape
E260: For E260 tape
E300: For E300 tape
- The remaining tape time may not be displayed correctly
depending on the tape used.
NTSC INPUT SELECT: To select the colour TV system
used to record NTSC signals.
- Press the Cursor buttons (◄►) 0 to select [AUTO].
Allows NTSC [4.43] or [3.58] signals to be distinguished
automatically.
- If the tape has not recorded
correctly, select 4.43 or 3.58.
4.43:
When recording NTSC 4.43 signals.
3.58:
When recording NTSC 3.58 signals.
Some programmes on NTSC 3.58 system
cannot be recorded correctly at this position.
NTSC PB SELECT:
To select the colour TV system of
the TV used to play back a tape
recording NTSC signals.
- Press the Cursor buttons {◄►) 0 to select the desired
position according to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43:
For TVs that can receive NTSC 4.43
signals.
3.58:
For TVs that can receive NTSC 3.58
signals.
JET NAVIGATOR:
To set to the conditions for the Jet
Navigator Function.
- Press the Cursor buttons ('^►) 0 to select [ON] or
[OFF].
OFF:
Initially set at this position.
ON:
Ql appears on the VCR display and Jet
Navigator function works.
DELETE NAVIDATA:
To delete all the Jet Navigator
data stored in the VCR’s memory.
- Press the Cursor buttons (◄►) 0 to select [OK] then
press the OK button 0 to do the deletion.
NO:
Initially set at this position.
END:
It is done to delete all the Jet Navigator data.
DIRECT REC:
To set to the conditions for Direct
Recording Function.
- Press the Cursor buttons ('^►) 0 to select [ON] or
[OFF].
OFF:
Initialiy set at this position.
ON:
This setting enables Direct Recording.
AV Input (A1) becomes exclusive channel for
Direct Recording.
(See page 17.)
MONAURAL:
To select the sound mode.
(For NV-FJ620EA only)
- Press the Cursor buttons (■<►) 0 to select [ON] or
[OFF].
ON:
To record the normal sound during a NICAM
broadcast or if the stereo sound is distorted
due to inferior reception conditions.
OFF:
Normally set at this position.
Press the MENU button 0 twice to exit the On Screen
Display.