Panasonic G-CODE NV-FJ620 - Manual (Page 9)

To Add and Delete the Channel
Example:
If you want to add a new channel between Channel 4 and
Channel 6,
1 Press the MENU button 0 to display the Main menu on
the TV screen.
On Screen Display
Press the Cursor buttons ( A V ) ©
to select [CH ADD&DELETE] then
press the OK button
Press the Cursor buttons ( A V ) ©
to select the desired programme
position (exampie CH3) then press
the Cursor button (►) © to select
[ADD],
. .......
► CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
Example:
If you want to delete Channel 6,
1 Press the MENU button © to display the Main menu on
the TV screen.
Press the Cursor buttons (A V) ©
to select [CH ADD&DELETE] then
press the OK button ©.
Press the Cursor buttons (A V) ©
to select the desired programme
position (example CHS) then press
the Cursor button {◄) © to select
[DELETE].
CH AOD&OELETE
r
CH ADDA DELETE CH AODADELETE CH ADD&DELETE
CH SELECT: BS END: MENU
Programme
Position
Channel
1 2
2 4
3 6
4 8
5 10
6 12
7 -
8 -
Programme
Position
Channel
1 2
2 4
■■■■ - 3 .'V - -■ ■ ■ - . "■
4 6
5 3
6 10
7 12
8 -
Programme
Position
dhannei
1 2
2 4
6
4 8
5 10
6 12
7 -
8 -
programme
Position
Channel
1 2
2 4
3 8
4 10
5 12
6
-
7 -
8 -
- Adding a channel shifts the programme positions of
Channel 6 to Channel 12 up, as shown in the list
above.
- The list of the programme positions do not appear on
the On Screen Display.
After adding, tune the added channel. (See steps 3-5 in
Manual Tuning on page 8.)
- Press the MENU button © twice and repeat steps 3-4
for each of the other programme positions.
Press the MENU button © four times to exit the On
Screen Display.
- Deleting a channel shifts the programme positions of
Channel 8 to Channel 12 down, as shown in the list
above.
- The list of the programme positions do not appear on
the On Screen Display.
- Repeat step 3 for each of the other programme
positions.
Press the MENU button © twice to exit the On Screen
Display.