Panasonic WV-7140 - Manual (Page 4)

(1) Sunshleld
(2) Front Glass
(3) Camera Mounting Plate
(4) Heater Unit (Optional)
(5) Cover
(6) Cover Lock
(7) Connection Board
(8) Lens Connector
(9) Fan Unit (Optional)
(10) Sensor Board (Optional)
(11) Connector for the Fan/Heater Unit (4p) - CN4
(12) Housing Control - 1. (8p) - CN2
1. Camera Power 5. AC Common
2. Fan/Heater 6. ^/C
3. N/C 7. N/C
4. N/C 8. GND
(13) Camera Power Supply Connector (3p) - CN3
1. Camera Power
2. AC Common
3. GND
(14) Video Connector - BNC (V)
Connect to Video output of the camera.
(15) Sync Connector - BNC (S)
Connect to GEN LOCK input of the camera.
(16) Connector for Zoom Lens (5p)
1. DC Common 4. Zoom Control
2. Iris Control 5. N/C
3. Focus Control
(17) Video Output Terminal
(18) External Sync Input Terminal
(19) GND
(20) Housing Control - 2 (lOp) - CN1
1. N/C 6. N/C
2. N/C 7. DC Common
3. N/C 8. Iris Control
4. N/C 9. Focus Control
5. N/C 10. Zoom Control
When mounting the Camera Housing to the Pan/Tilt
Head WV-7260D.
• Two M8 X 20 mm (5/16" x 13/16") hex head bolts,
lockwasheres and plain washers are provided with the
Pan/Tilt Head. Use these to mount the camera housing
as shown below.
INSTALLATION OF CAMERA
HOUSING
• Be sure to align the camera direction and front direction
of Pan/Tilt Head.
-3-