Off-timer button, 30ci>60 ci>90 t^auto, 14, stereo/bilingual sound selection button – Panasonic TC-25V50H EN User Manual
Page 22: For tc-25v50h, tc-2552g), Remote control operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Control Operation
13. Off-Timer Button
The TV set can be preset to switch off
after a fixed period of time.
Press the Off-Timer button will set the TV
set for 30 minutes. Press again to set 60
minutes and so on. The selected time
will be displayed on the bottom right of the
screen.
The sequence is as follows :
30ci>60 ci>90 t^AUTO
_____ _____________
0
e.g. Setting 30 minutes off- timer.
The selected time disappear after a few
seconds and it*s will be displayed when
the Recall button is pressed. This will
give you the remaining time.When the
Off-Timer reaches its last 3 minutes, it
start blinking before go to stand-by
condition.
r
1
—
--------------Ч
Ч____
(Взо ^ <=i>
____
1324 ^
( after 6 minutes)
The selected time start blinking
at last 3 minutes before
stand-by condition.
Note ; Setting Off - Timer to AUTO mode.
If the set is not switched off, when
the TV station ends broadcasting, it
will automatically go to stand-by
condition after 5 minutes.
This AUTO mode will not operate
when the TV receiver is in AV mode.
How to cancel the off-timer setting
1. Set the pre-set time condition to ”0” mode
by pushing the ”off-timer” button.
2. Turning the TV set off, using the button on
the remote control or the power switch
button on the TV set.
14, Stereo/Bilingual Sound Selection
Button
(For TC-25V50H, TC-2552G)
cpiv
By using this button, the ” STEREO ” or
” MONO ” mode can be selected.
When this button is pressed, on-screen
indication will change depending on type of
broadcasting transmission.
oo