Panasonic PV C2032W - Manual (Page 16)

TV Timer Features
ON-TIMER with Alarm
This unit can be set to automatically power on in one of 2
modes (TV, Playback, or FM radio).
You can also combine the On-Timer with a one minute
alarm that gradually increases in volume.
1 Press PROG to display SET PROGRAM
screen.
SET TIMER
SL£B= TlMER:00
SELECT:A ▼
SET
:SET
END :Т1Ш^
1) Press AT to select
“ON TIMER.”
2) Press ► to display
ON TIMER screen.
Ч|/ОЧГ/«МЕН
[ЯШ
ЭШ5ШШ2В
Баня-:* т
SET >
END :PnOG
ON-TIMER mode
selection order
CH02—СН03..... CHI 25
r
CHOI
L.FM9—FU8
1
PLAY
1) Press AT to select
desired settings.
2) Press ► to set the]
ON-TIMER TIME or
ON-TIMER mode.
• Make sure a tape is
inserted if Playback mode
is selected.
See “FM Radio” on
pages 20 and 21 for
instructions on how
to preset FM stations.
_AL^:Crj
CANCa.:ADO/DLT
SELBCTiA T
SET :M ►
END :PnOG
Press AW to select
ALARM “ON” or
“OFF.”
When “ON” is selected,
an alarm will gradually increase in volume for one
minute or until canceled by pressing any button
(including VOL -i- -).
To Make Corrections,
use AW and ◄ ► to move back and correct.
5 Press PROG to set ON TIMER.
•“ON TIMER SET” is displayed.
• ON TIMER Indicator lights on the unit.
To Cancel ON-TIMER set,
Repeat steps 1 and 2. Then, press ADD/DLT to
clear the time in step 3. Now, press PROG to end.
“ON TIMER END” briefly appears on-screen.
1^1 Ready Check List
□ The clock is set to correct time.
• If no button on the remote or unit
(including a button used to turn off
the alarm) is pressed within 60
minutes after unit turns itself on,
it will turn itself back off.
16
Fbrassistance,pleasecall:1-0OO'211-PANA(7262)orsend&maiIto:consumerpfDducts@panasorticxom