Step 2a. set-top box connection to conventional tv, Conventional tv setup, Procedure – Panasonic TU-DST50 User Manual
Page 21: Step 3. antenna/cable connection, Conventional tv
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
G
etting
S
tarted
Step 2a. Set-Top Box Connection to Conventional TV
Follow this diagram when connecting the STB to a conventional TV.
NOTE: S-VIDEO. VIDEO AND AUDIO
CABLES NOT INtLUDED
Connect the
S-Video
or
video cable.
See Note
below.
CONVENTIONAL TV SETUP
Procedure
•
Connect video cable from the NTSC video output jack on the STB to the video input jack on
the TV.
OR
•
Connect S-Video cable from the NTSC S-Video output jack on the STB to the S-Video input
jack on the TV.
Note:
Connect either the S-Video or video input/output.
•
S-Video will provide better picture quality.
•
If both S-Video and video are connected, S-Video will override video.
•
Connect audio cables from the left and right NTSC audio output jacks on the STB to the left
and right audio input jacks on the TV.
Step 3. Antenna/Cable Connection
Connect the antenna or cable wire to the ANT (Antenna) jack on the rear panel of the
STB.
Incoming signal
from antenna or
cable
Wl