Step 6a. action / navigation button, Remote action / navigation button, Step 7. antenna/cable mode – Panasonic TU-DST50 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
G
etting
S
tarted
Step 6a. ACTION / Navigation Button
Press the ACTION button to select main menu items. Press the A or ^ arrows to
highlight sub menus. Press the ^ arrow to select features. Press the A or V arrows
to scroll through options within a feature. Press the ^ arrow to return to main menu
items.
Remote ACTION / Navigation Button
Note:
Be careful to press ACTION in the middle of the button. If you do not press in the
middle of the button, the arrow buttons may be activated.
Step 7. Antenna/Cable Mode
Select either Antenna or Cable mode, depending on the type of incoming signal you
are using. Cable must be 8VSB format.
Procedure
□
In SET UP Menu, select INPUT to choose either ANTENNA or Cable.
n Press the ^ arrow, then the ^ and V arrows to select ANTENNA, Cable STD, Cable HRC
or Cable IRC.
•
ANTENNA-VHF/UHF
•
Cable STD - Standard Cable TV Signals
•
Cable HRC - Harmonic Related Carrier
•
Cable IRC - Incremental Related Carrier
Note:
Contact your local cable provider if you are not sure which setting to use.
□
Press the
ACTION
button to make your selection.
□
Press the ^ arrow to exit back to Roller Guide.
Note:
Whenever the antenna or cable mode is changed. Timer 1 and Timer 2 will revert back
to default settings.
W\