Ìjsfbitlhg to radiò hmade&sfs – Panasonic SC-AK15 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ÌJsfBitlhg to radiò hmade&sfs

m

Press TUNER BAND to select “FM” or

“i

The power will come on automatically.

Every time you press the button; FM ^—> AM.

Press

TUNE

MODE

to

select

“PRESET” or

“MANUAL”.

Every time you press the button; MANUAL <—> PRESET.

PRESET: For preset stations

MANUAL: For non-preset stations

Press

V

or

A

to select the desired broadcast.

"ST" lights when an FM stereo broadcast is being received.

TUNED” lights when you precisely tune in a broadcast station.

Adjust the volume level.

Àuto tuning

k

With non-preset stations

TUN№ Sr

F

SB IB-

Received frequency

■tuwi; ■ it

- MB*

Auto tuning is an easy way to tune in non-preset stations in the

“MANUAL" mode.

Hold down either

V

or

A,

and release the button when the

frequency starts scrolling.

The radio will stop automatically on the first station it picks up.

• When there is outside interference, the radio sometimes stops on

a certain frequency where no station is broadcasting.

To stop auto tuning

Press either v or A again.

if noise is excessive in Hie FM stereo mode

Press FM WIODE/BP. “MONO” will light up.

Sound will be produced in monaural, but this also reduces noise.

Press the button again to cancel. “MONO" will go out.

Normally, you’ll want to listen in stereo, so leave "MONO” off. This

way, you can listen to stereo broadcasts in stereo, and monaural

broadcasts in mono.

You can preset an FM station in monaural by following the steps

under “Presetting oniy your favorite stations" on page 10. After

selecting the station in step 1, select “MONO" with FM MODE/BP,

then continue with steps 2 and 3.

• if you preset stations in memory, you can tune in a preset station

by simply selecting the preset channel with the numeric buttons

on the remote control.

1. Press TUNER on the remote control,

2. Press the numeric button{s) to select the desired preset

channel.

To select a two-digit channel:

Press a10 and then the two numbers you want within 10

seconds or so.

• Sound is momentarily interrupted if you ioad/unload tapes while

listening to an AM broadcast.

s

-S

E

«
&

,0

I

Advertising