Set-up features – Panasonic CT-20R13 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Set-Up Features
• Set Time
• Ant (Antenna)
« Auto Prog (Program)
• Manual Prog (Program)
• CC (Closed Caption) on Mute
o CC (Closed Caption) Mode
o English, Español (Spanish) or Français (French)
Located On Remote Control
Ant (Antenna)
— The proper Input mode must be
selected for the type of signal at the antenna input.
• TV mode is used when the Receiver is not connected
to a cable TV system, for example when using a
VHF/UHF antenna (channels 02 - 69).
« Cable mode is used when the Receiver is connected
to a Cable TV system and you are not using a cable
company converter box (channels 01 - 125).
1. Press the ACTION button to display the Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu.
Set Time
— Clock (when set) will display on screen
at initial ‘Turn On”, after a channel change and when
pressing the RECALL button. The time must be set first
in order to operate the Program ON/OFF Timer.
1. Press the ACTION button to display the Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu, “SET TIME” will be highlighted.
ÎSET^UïS
SETaTlME.-.-- 1-
I
:|r
AüTOJÎÎRQGfc
MANUAlâeRM
{^I
onímuje
M
ÜglH
4. Press the CH DOWN button to highlight “ANT”.
5. Press the VOL LEFT or RIGHT button to select TV
or CABLE.
6. Press the ACTION button twice to exit the Set-Up
Menu.
4. Press the VOL LEFT or RIGHT button to set hours
(set AM/PM accordingly).
5. Press the CH DOWN button to select minutes
position.
6. Press the VOL LEFT or RIGHT button repeatedly to
set minutes.
7. Press the ACTION button twice to exit the Set-Up
Menu.
- 1 7 -