Panasonic CT-20R13 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Set-up Features
(cont.)
Located On Remote Control
Manual
Prog
(Program)
—
This
feature
allows you to select which channels are placed into
Channel Scan Memory.
1. Press the ACTION button to display the Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set-Up Icon.
3. Press the ACTION button to display the Set-Up
Menu.
[SET^UPJ
smiME
ANtr
AUTGIPROG
MANUAL PROG
■fiasEi ■
ESPANOLWPRANCAIS
4. Press the CH DOWN button to highlight “MANUAL
PROG”.
5. Press the VOL LEFT or RIGHT button to display the
Manual Programming Menu.
6. Use the CH UP or DOWN button or the Remote
Keyboard “0 through 9” buttons to select channels.
7. Press the VOL RIGHT button to add channel(s) to
memory (Blue). Press the VOL LEFT button to
delete channels from memory (Yellow).
8. Repeat steps 6 and 7 to continue adding or deleting
channels.
9. Press the ACTION button twice to exit the Manual
Programming Menu.
- 1 9 -