General operation on the tv set, Tv / av selection button, Volume up / down button – Panasonic TC-29V50R User Manual
Page 16: Programme number up / down buttons, Preset ( pre.) button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
General Operation on the TV Set
1. TV / AV Selection Button
TV/AV
Press the button to select the TV mode, AV1
mode, or AV2 mode.
The sequence is as below :
1
4.5 MHz
AUTO
------------- S
MONO
f N
AV1
AUTO
^ MONO SURROUND ^
^ MONO SURROUND ^
Note:
When TV mode is selected, the last Programme
Number, Sound System, Colour System,
Surround mode and Sound output {depending
on type of broadcasting transmission) mode
will appear.
When AV mode is selected, the last AV mode.
Colour System and Surround mode will appear.
If the S-Video cable is connected to S-Video
Terminal (for AV1 only) the selected AV mode,
S-Video symbol “d*-" (AVI only) will appear
on the screen.
e.g. S-Video cable is connected to S-Video
terminal and AV1 is selected.
AviCB-
AUTO
SURROUND OFF
2. Volume Up / Down Button
0*
Press these buttons to adjust the sound level.
These buttons also can be used for level Up
or Down adjustment in the Picture Control
Function mode and Sound Control Function
mode.
3. Programme Number Up / Down
Buttons
Press these buttons to select next higher
or next lower Programme Number.
4. Preset ( PRE.) Button
PRE.
Please refer to pages 14-15 about this button.
16