Panasonic KV-SS855D - Manual (Page 21)

Display Panel Instructions
ISetting other parameters
The following parameters can be set.
Language: Sets the display language (English, Japanese).
Buzzer : Sets whether a bell rings or not. If set to "ON", the following will occur.
When pressing a button, one short beep will be heard.
• When there is an error, 4 short beeps will be heard.
When scanning is completed correctly, one long beep will be heard.
Date : Sets the current date.
Time : Sets the current time.
Version : Displays the unit version.
Setting the language
1 Press the menu key until
Other Param." is displayed. 'Set
s
e
t 0 t h
e r P a r a m
2 Press the enter key.
L a n 9 u a
g
e
E i n i g 1 i s h
X <
Zl
*
3 Use the ▼ key or the A key to se­
lect "English" or "Japanese".
L a n 9 u a 9 e ?
J a
_e_
a 1 n e 1 s e _ > Zl
-
4 Press the enter key.
• To return to the previous setting (in
step 2), press the esc key.
After entering the other parameter
setting mode, pressing the menu key
will change the display as follows.
Use the menu key to select the de­
sired setting.
Language -* Buzzer Date
- Version ^Time ^
C □
21