Panasonic PANASYNC SL90I TX-D9S55 - Manual (Page 7)

Specifications
CRT Size 19" CRT (18.0“
/
45.7 cm Viewable Image Size) Flat Square
Dot-pitch 0.25 mm
Phosphor/Glass RGB medium short persistence (Hi-EU RED), Crystal Pigment
/
Dark tint
Surface treatment B-AGRAS (Anti-Glare, anti-Reflective and Anti-Static) Coat
Input signals Video signaling RGB analog
Signal level 0.7 Vp-p (without sync, signal), 1.0 Vp-p (with sync, signal)
Sync, signal H
/
V separation (TTL level),Hd
/
V composition (TTL level),
Sync.-on-green
Frequency Range Horizontal Frequency: 30.0 kHz to 97.0 kHz
Vertical Frequency : 50.0 Hz to 180.0 Hz
Preset mode 1 preset and 7 resenration (See page 15)
Video Maximum Pixel Clock 202.5 MHz (typ.)
Resolution 1,600 dots (H)
X
1,200 lines (V) at 75 Hz*
Viewable Image Size Factory preset
(H
X
V, Diagonal) Full scan (Typical)
13.86“ X 10.39", 17.3" Diagonal
**
14.37"
X
10.79“, 18.0" Diagonal
**
Display Color Analog input, unlimited number of colors
***
Connectors Video Signal 15 pin mini D-Sub connector (female pins), BNC x 5
Power supply CEE 22 type 3-pin connector
Input power 100 to 240 VAC (50 or 60Hz)
Power consumption 125 W typ.
/
< 10 W stand-by, < 3 W sleep mode (See page 14)
Controls Front Power ON
/
OFF,
[a, a,
B, [2] keys
On screen display Contrast, Brightness, Size & Pos. (Zoom, H. Position, H. Size,
V. Position, V. Size), Geometry (V. Pincushion, Side Pin. Bal.,
Trapezoid, Parallelogram, Top Corner, Bottom Corner, S-Curve 1,
S-Curve 2), Rotation (Tilt), Color Temp, (9300K + 8 MPCD, 7500K,
6500K, 5000K, 9300K + 27 MPCD, User), Recall, Video Level
(0.7 V
/
1 V), H. Moire, V, Moire, H.Convergence, V.Convergence,
Linearity-C, Linearity-E, Language, OSD Position, Degauss, Signal,
Self-Test menu
Tilt
/
swivel 13° up, 4° down, 90° each to right and left
Dimensions (W x H x D) 17.6"
X
17.9"
X
16.3"
(448 mm x 454 mm x 415 mm)
Weight (monitor only) 20.5 kg (45.2 lbs)
Approvals UL1950, CSA 22.2 No.950, TUV
/
GS, CE
/
CISPR 22-B (EN55022),
NORDIC, FCC Class B, DHHS, HC, IC-B, VCCI Class B,
MPR II, TCO’92,
E nergy S tar ®,
ISO 9241-3 (Ergonomics)
/
-8 (Colors)
Standard 1 detachable signal cable for VGA, SVGA
1 detachable AC power supply cord
Tilt & Swivel base attached
Operating Instructions, Warranty card
Environmental conditions Operating Temperature 5 to 35‘C (41 to 95’F)
Humidity 5 to 90% (no condensation)
Altitude 10,000 ft
Storage Temperature -20 to -t-60*C (-4 to 140° F)
Humidity 5 to 90% (no condensation)
Altitude 40,000 ft
Windows® 95
/
98 Plug & Play VESA® DDC™ 1
/
2B meets Windows^ 95
/
98 Plug & Play
Requirements
Note:
• The on-screen image may flicker if the display is operated with the Vertical freq. under 60 Hz.
* This monitor may only be used in a commercial or industrial environment at resolutions above 1,600 x 1,200 at 75Hz.
" Depends on signal timing used, see page 15.
*** Number of colors depends on the Video Board used, memory installed, and RAMDAC {Random Access Memory
Digital to Analog Converter).
Specifications and design are subject to change without notice.
This product may be subject to export control regulations. Weight and dimensions shown are approximate.