Panasonic SR-SH15PA - Manual (Page 6)

HOW TO USE
2
3
4
5
6
7
Measure rice with the measuring
cup provided.
Rinse rice in a separate bowl
until the water becomes relatively
clear.
Place rinsed rice in the pan. Add water.
e.g. For 6 cups rice, add water to LEVEL INDICATOR 6.
LEVEL INDICATOR
MAXIMUM LEVEL
Do not cook with more than this level
of water.
Set the inner lid onto the outer lid.
Place the pan in the body.
Make sure that the pan is directly
in contact with the heating plate
by turning it slightly from right to
left until it seats properly.
Close the outer lid.
The lid is locked properly when it clicks.
Plug in.
Immediately press the switch. The “Rice Cook” lamp tells
you when cooking has started.
When rice is cooked, the switch will pop up,
“Keep Warm" lamp lights to indicate
“Keep Warm" function is working.
w
After switch pops up, leave the lid closed for at least
15 minutes to steam rice.
-
5
-
Do not rinse rice in the rice
cooker pan.
I Adjust the quantity of water to
your personal taste.
Wipe the surface of the pan
before use. If it is wet, it may
cause noise while cooking.
It may also damage the unit.
If outer fid is not securely closed,
cooking will be affected.
Do not open the outer lid when
in use.
Do not plug in until you get ready
to cook. Otherwise, rice may be
ruined.
If pan is not in the cooker, cooking
will not begin.
“Keep Warm” function
continues until the unit is
unplugged.