Convergence – Panasonic PT 56WXF95 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
S
pecial
F
eatures
Convergence
In SET UP menu, select CONVERGENCE under OTHER ADJ. only after moving the
PTV to adjust for the effects of the earth’s magnetic field on the projection tubes.
SET UP
LOTHER ADJ.C:
CONVERGENCE
Note:
Convergence seldom needs adjusting, except when moving the TV.
Use the navigation buttons to align the horizontal and vertical green lines on screen
with the outside reference marks, as shown below. Press the ACTION button to move
to the RED CONVERGENCE screen.
CONVERGENCE
NEXT : ACTION
Reference Marks
i
Use the navigation buttons to align the red cross with the white cross pattern at the
center of the screen. Press ACTION to continue to the blue convergence adjustment
screen and repeat.
Wofe:
TO PREVENT PICTURE TUBE DAMAGE, DO NOT LEAVE TEST PATTERN
ON FOR AN EXTENDED PERIOD OF TIME.
An adjusted cross pattern appears white with a
minimum of color fringing.