C> greeting message, To erase the recorded greeting message, Pre-recorded greeting message – Panasonic KX-TCM420-B User Manual
Page 14: Greeting message
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
C> Greeting Message
To erase the recorded greeting message
Press [GREEfiNG CHECK) => press [ERASE] while the message is being
played.
oThe unit will answer a call with a pre-recorded greeting.
Pre-recorded greeting message
If you do not record a personal greeting message (p. 13), one of the
following two messages will be played when a call is received depending
on the caller’s recording time (p. 17).
To check the pre-recorded greeting,
press [GREETING CHECK).
oThe pre-recorded greeting is played as below.
□When the recording time is set to “1 minute” or “unlimited”;
“Hello, we are not available now. Please leave your name and phone number
after the beep. We will return your call.”
□When the recording time is set to “greeting only”;
“Hello, we are not available now. Please call again. Thank you for your call.”
14