Aytomatès aoswerimig operaiiomi, Setting the unit to answer calls, Monitoring incoming calls – Panasonic KX-TCM420-B User Manual

Page 33

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

AytomatÈs Aoswerimig Operaiiomi

When the unit answers a call, the unit plays back your greeting message
and records the caller’s message.

oThe total recording time {including the greeting message) is

about

16 minutes.

If messages are recorded in noisy rooms, the time

may be shortened up to 5 minutes.

oA maximum of 64 messages can be recorded.

Setting the Unit to Answer Calls

Press fANSWER ON] to turn on the answering system.

oThe indicator lights and

“Answer set"

is

heard.

oThe unit will announce the remaining

recording time if it is less than 5 minutes.

o|f you hear

“Memory

full” and the

indicator flashes rapidly, erase some or

all of the messages (p. 36).

fANSWER ON

and Indicator

o|f you do not want the unit to answer calls, press (ANSWER ON) to turn

the answering system off. The indicator light goes out and

“Answer off’

is

heard.

oYou can also turn on the answering system remotely using any phone

(p. 45).

Monitoring incoming calls

While a call is being recorded, you can monitor it through the speaker.
To answer the call with the speakerphone, press (DIGITAL SP-PHON^ or
(REMOTE S^. For the handset, lift the handset off the base unit or press
(TALK 1. The unit stops recording.

(To monitor incoming calls with the handset, see page 48).

33

Advertising