Greeting message sample, To erase the recorded greeting message, Pre-recorded greeting message – Panasonic KX-TCM943-B User Manual
Page 15: Flash memory message backup
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Greeting message sample
“Hello, this is (your name and/or number). Sorry I cannot take your
call. Please leave a message after the beep. Thank you.”
To erase the recorded greeting message
Press (GREETING CHECK] ^ press (ERASE) while the message is being
played.
•The unit will answer a call with a pre-recorded greeting.
Pre-recorded greeting message
If you do not record a greeting message {p. 14), one of the following two
messages will be played when a call is received depending on the caller’s
recording time (p. 18).
To check the pre-recorded greeting, press [GREETING CHECK).
•A pre-recorded greeting will be played as below.
■When the recording time is set to “1 minute” or “unlimited”;
“Hello, we are not available now. Please leave your name and phone number
after the beep. We will return your call.”
■When the recording time is set to “greeting only”;
“Hello, we are not available now. Please call again. Thank you for your call.”
Flash Memory Message Backup
Messages are stored indefinitely on a “flash memory” 1C chip—even
if a power failure occurs. All of the messages are saved until you
erase them.
15