Panasonic KX-TCM943-B - Manual (Page 57)

Answering System
Problem Remedy
The answering system is on,
but incoming messages are
not recorded.
•The recording time is set to “greeting
only". Select “1 minute” or “unlimited”
(p. 18).
• Memory is full. Erase some or all of
the messages {p. 38).
“ BCTl ” is displayed and the
ANSWER ON indicator
flashes rapidly, and no new
messages are recorded.
• Memory is full. Erase some or all of
the messages (p. 38). If “ BTW” is still
displayed and the ANSWER ON
indicator flashes rapidly, erase your
greeting message and re-record a
shorter greeting {p. 14, 15).
Some incoming messages
have not been recorded
completely.
•Set the CPC function to “b” (p. 20).
You cannot operate the
answering system at the
base unit. •The handset user is operating the
answering system. Wait until the
IN USE/CHARGE indicator light goes
out.
You cannot operate the
answering system from a
touch tone phone. • Be sure to enter the correct remote
code.
•The answering system may not
respond if the tones are too short to
activate the unit. Press each button
firmly.
•The answering system is off. Turn it on
(P. 47).
You cannot operate the
answering system with the
handset by pressing
[SCREEN/PLAYBACK].
• Someone is operating the answering
system.
•You are too far from the base unit.
Move closer to the base unit.
\
57