Set up features, Auto programming, Helpful hints – Panasonic CT-36SF24 User Manual

Page 29: Manual programming

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Auto Programming

- The Auto Programming

feature allows you to place all channels with a video signal

into Channel Scan Memory. When you press A or^,

only those channels with a video signal will be accessed.

NOTE: TV or Cable Tuning mode must be set properly for

your system.

Set Up Features

1. Press

2.

Press ^ or
Icon.

to display the Main Menu.

and or^ to highlight the Set Up

3. Press to display the Set Up Menu.

4.

Press A or ^ to highlight AUTO PROGRAM.

5.

Press or ^ to start Auto Programming Scan.

Channels will automatically advance until all channels

have been scanned.

• Channel numbers with video signal present will turn

blue which indicates stored in Channel Scan Memory.

6.

Press ^3 twice to exit menus.

NOTE: Some channels with very weak signals may be

locked into memory. These must be deleted
manually using the Manual Program feature.

Helpful Hints:

After Auto Programming:

Blue channel number indicates channel is in Channel

Scan Memory.

All channels are available by direct access using the
Keyboard numbers “0 through 9”.

After Auto Programming Scan has completed, up to 15

channels will be programmed into the FAVORITE

Channel Scan if space is available. Any original
channels that were programmed into FAV CHANNEL
will remain. (Refer to Favorite Channel Scan for
deleting unwanted channels.)

Manual Programming

- This feature allows

you to select which channels are placed into Channel

Scan Memory so when you press

A

or ^ only those

channels you desire will be accessed.

1. Press the (US to display the Main Menu.

2.

Press

A

or ^ and or ^ to highlight the Set Up

Icon.

3.

Press ifeO) to display the Set Up Menu.

4.

Press

A o r t o highlight

MANUAL PROGRAM.

5.

Press or ^ to display Manual Programming

Menu.

6.

Use the Remote Control Keyboard numbers “0

through 9” or

A

or ^ to select channels.

7.

Press ^ to add channel(s) to memory (blue). Press

the ^ to delete channel(s) from memory (yellow).

8.

Repeat Steps 6 and 7 to continue adding or deleting

channels.

9.

Press ^3 twice to exit menus.

- 2 9 -

Advertising