Troubleshooting – Panasonic CF-VDD723 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Troubleshooting
The computer does not rec
ognize the drive.
•
Check the settings by following the instructions in
“Preparations”.
• Is the drive properly mounted in the multimedia pocket?
The MP indicator (@) does
not light.
Is the disc loaded on the tray correctly?
Cannot play disc or read data
from it.
Is the disc bent, scratched, or dirty?
Cannot eject disc.
Is the computer powered on?
To remove a disc when the computer is powered off, in
sert a sharp object such as the bent-out tip of a pap>er clip
into the emergency hole. Pushing it completely to the end
will free the tray so that it can be pulled out.
Emergency Hole
A blue background appears
on the screen with the
MPEG image.
Did you open the drive or remove the disc while it was
operating?
Re-insert the disc and close the drive. Press t Enter 1.
The disc tray does not close.
Did you touch the eject button when you close the tray?
Cannot access file for the
DVD-ROM drive.
When the DVD-ROM drive is replaced after the CD-R/
RW drive has been installed in the Multimedia Pocket,
files inside the drive sometimes cannot be accessed.
In this case, execute [Scan for hardware changes] using
the following procedure.
1 Select [Device Manager] in [start] - [Control Panel] -
[Performance and Maintenance] - [System] - [Hard
ware],
2
Select the drive displayed under [DVD/CD-ROM
drives] (e.g., MATSHITA****), then select [Action] -
[Uninstall] from the menu and select [OK],
3 Select [Action] - [Scan for hardware changes] from the
menu. (Microsoft Corp. has reported that the above
noted problem occurs.)
10